Product ID:PROFESSIONAL FINISHES SHOP PRIMER RED, 59-3
MSDS Date:07/18/1990
FSC:8010
NIIN:00N034173
MSDS Number: BPWDR

PPG INDUSTRIES INC

4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555;800-441-9695

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

SILICA, CRYSTALLINE - QUARTZ; (QUARTZ)

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 10-15%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

SILICA, CRYSTALLINE - CRISTOBALITE

CAS: 14464-46-1

RTECS: VV7325000

Fraction By Weight: 2-5%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.05 MG/M3 RDUST9293

TO GENERATE EXCESS AMTS OF RESPIRABLE SILICA, SO

RTECS: 9999999ZZ

DIZZ, & LOSS OF COORD ARE INDICATIONS THAT SOLV

RTECS: 9999999ZZ

DISTURB MAY INDICATE EXCESS EYE CONT. DRY, ITCH,

RTECS: 9999999ZZ

OF AIRBORNE CONTAMINANTS AGAINST WHICH

RTECS: 9999999ZZ

& TO REMOVE DECOMPOSITION PRODUCTS DURING WELDING OR

RTECS: 9999999ZZ

IRON(III) OXIDE

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 2-5%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (MAGNESIUM

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 15-20%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST

DIATOMACEOUS EARTH; (SILICA, AMORPHOUS-DIATOMACEOUS EARTH)

CAS: 68855-54-9

Fraction By Weight: 20-25%

SILICA, CRYSTALLINE-FUSED; (SILICA, AMORPHOUS-FUSED)

CAS: 60676-86-0

RTECS: VV7328000

Fraction By Weight: 5-10%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (MEDIUM

CAS: 64742-88-7

Fraction By Weight: 15-20%

SOLVENT NAPHTHA (PETROLEUM), LIGHT ALIPHATIC; (LIGHT

CAS: 64742-89-8

Fraction By Weight: 20-25%

SOLVENT NAPHTHA (PETROLEUM), LIGHT ALIPHATIC; (LIGHT

CAS: 64742-89-8

Fraction By Weight: 2-5%

FILM FORMERS, RESINS, & ADDITIVES

Fraction By Weight: 10-15%

INGREDIENTS 10-11 ARE COMPONENTS OF ONE OR MORE OF THE

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: HARMFUL/FATAL IF
SWALLOWED EYE: CAUSES IRRIT. SKIN: MAY CAUSE MOD IRRIT. INHAL: VAP
& SPRAY MIST MAY BE HARMFUL IF INHALED. VAP IRRITATES
EYES/NOSE/THROAT. SAND & GRIND DUSTS MAY BE HAR MFUL IF INHALED.
RPTD EXPOS TO HIGH VAPCONC MAY CAUSE IRRIT OF RESP SYS & PERM BRAIN
& NERV SYS DAM. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:CRYSTALLINE SILICA QUARTZ AND
CRYSTOBALITE : GROUP 2A(IARC).
Effects of Overexposure:HLTH HAZ: INTENTIONAL MISUSE BY DELIB CONC &
INHALING CONTENTS CAN BE HARMFUL/FATAL. CHRONIC: AVOID LONG TERM &
RPTD CONT. PROD CNTNS A FORM OF CRYSTALLINE SILICA WHICH HAS IARC
ASSOC W/AN INCR RISK O F CANCER IN LAB ANIMALS. LONG-TERM EXPOS TO
CRYSTALLINE SILICA MAY ALSO LEAD TO DISABLING INJURY KNOWN AS (SUPP
DATA)

First Aid:INGEST: DO NOT INDUCE VOMIT. EYE: FLUSH IMMED W/PLENTY OF
H*2O FOR @ LST 15 MIN. SKIN: FLUSH IMMED W/PLENTY OF H*2O FOLLOWED
BY WASHING W/SOAP/H*2O. INHAL: REMOVE TO FRESH AIR. APPLY ARTF RESP
& OTHER SUPPORTIVE MEASURES AS REQD. OTHER: IFANY OF THE FOLLOW
OCCUR DURING/FOLLOW USE OF PROD, CONT POIS CTL CTR, EMER ROOM/PHYS
IMMED; HAVE MSDS INFO AVAIL.

Flash Point Method:PMCC
Flash Point:68.0F,20.0C
Lower Limits:0.9%
Extinguishing Media:USE NATL FIRE PROT ASSOC CLASS B EXTING (CO*2, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORM FOAM) DESIGNED TO EXTING (SUPP
DATA)
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP. H*2O
SPRAY MAY BE USED TO COOL CLSD CONTRS TO PVNT PRESS BUILD-UP & POSS
AUTOIGNIT/EXPLO WHEN EXPOS (SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CONTRS TIGHTLY CLSD. ISOLATE FROM
HEAT/ELEC EQUIP/SPARKS, & OPEN FLAMES. CLSD CONTRS MAY EXPLODE WHEN
EXPOS TO EXTREME HEAT. DO NOT APPLY TO HOT(SUPP DATA)

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
RESP & SKIN/EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE ALL
SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST, VERMICULITE/OTHER
ABSORB MATL & PLACE INTO CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LG QTY
IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA CLASS IB
FLAMMABLE LIQUIDS.
Other Precautions:IF MATL IS PART OF A MULTIPLE COMPONENT COAT SYS,
READ MSDS FOR OTHER COMPONENT/COMPONENTS BEFORE BLENDING AS RSLTG
MIX MAY HAVE HAZ OF ALL OF ITS PARTS. CONTRS SHOULD BE GROUNDED
WHEN POURING. AVOID FREE FALL OF LIQ IN EXCESS OF A FEW IN.

Respiratory Protection:OVEREXP TO VAPS MAY BE PVNTD BY ENSURING VENT
CTLS VAP EXHAUST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD (TC-23-C) PAINT
SPRAY/AIR SUPPLIED (TC-19C) RESP MAY ALSO REDUCE EXPOS. READ RESP
MFRS INSTRUC & LITER ATURE CAREFULLY TO DETERM TYPE (ING 15)
Ventilation:PROVIDE GEN DILUTION/LOC EXHAUST VENT IN VOL & PATTERN TO
KEEP CONC OF INGRED BELOW LOWEST SUGGESTED EXPOS LIM,(ING 16)
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:CHEM WORK GOG OR FULL LNGTH FSHLD.
Other Protective Equipment:WEAR PROTECTIVE CLOTHING, INCLUDING
IMPERMEABLE APRON CONSTRUCTED OF NITRILE RUBBER, NEOPRENE
RUB/POLYVINYL ALCOHOL.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
EXTING MEDIA: NFPA CLASS IB FLAMM LIQ FIRES. FIRE FIGHT PROC: TO
EXTREME HEAT, IF H*2O IS USED, FOG NOZZ ARE PREF. EXPLO HAZ: SURF.
TOX GASES MAY FORM WHEN PROD IS CONTACTED BY FLAME/HOT SURF. EFTS
OF OVEREXP: SILICOSIS. THESE EFTS ARE ASSOC W/BRTHG EXCESS AMTS OF
SILICA DUST. APPLICATN OF PROD IS NOT EXPECTED (ING 12)

HCC:F3
Boiling Pt:B.P. Text:93.0F,33.9C
Vapor Pres:11.7
Vapor Density:HVR/AIR
Spec Gravity:1.19
Evaporation Rate & Reference:90(BUTYL ACETATE=1)
Solubility in Water:0.0%
Appearance and Odor:VISCOUS LIQUID WITH AN ODOR CHARACTERISTIC OF THE
SOLVENTS
Percent Volatiles by Volume:68.80

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PROD WHEN HEATED.
WELDING, BRAZING, OR FLAME-CUTTING ON SURF COATED W/PROD MAY PRDCE
FUMES INCL CO.

Waste Disposal Methods:WASTE MATL MUST BE DISPOSED OF I/A/W FED, ST,
PROVINCIAL, & LOC ENVIRON CTL REGS. EMPTY CONTAINERS SHOULD BE
RECYCLED OR DISPOSED OF THROUGH AN APPROVED WASTE MANAGEMENT
FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.